SearchallPrepressOne-colour pressesTwo-colour pressesFour- and five-colourPostpress
max. usable size – 640 х 750 mm • computer with 100 programs • automatic diffusion foil • lamp brightness control sensor • controlled lamp cooling • 2 types of vacuum, 3 types of exposure
max. usable size – 1150 х 950 mm • computer with 100 programs • quick-start lamp 3 kW • diffusion foil - automatics • lamp brightness control sensor • controlled lamp cooling • 2 types of vacuum, 3 types of exposure • dimensions: 1390 х 1170 х 2460 • net weight: 420 kg
size – 660 mm • fully automatic • gumming and drying opening • power-supply – 3 kW, 220V, 50 Hz
size – 560 mm • fully automatic • gumming and drying opening • power-supply – 3.3 kW, 220V, 50 Hz
Input size – 620 mm • Fully automatic • Gumming and drying opening • Power-supply – 3.3 kW, 220V, 50 Hz • Condition - completely overhauled • New alkaline-proof rubber rollers, thermo sensor, circulation pump
size – 860 mm • fully automatic • gumming and drying opening • power-supply – 3.3 kW, 220V, 50 Hz • width: 1320 mm • depth: 2265 mm • height: 1000 mm
1 printing unit • impressions: 47 mio. • size: 36 х 52 cm • BACHER register system • quick action plate clamps • WEKO – powder sprayer • + Version (ready for building in a numerating and perforating section and second colour)
impressions – 27 mio. • 1 printing unit • size – 36 х 52 cm • BACHER register system • quick action plate clamps • WEKO – powder sprayer • numerating and perforating section (new)
1 colour offset press of size 52 x 74 cm • impressions: 56 mio. • alcohol dampening incl. refrigeration and recirculation • BACHER – register with plate punch • quick action plate clamps • GRAPHIX – powder spray
1 colour offset press of size 36 x 52 cm • impressions: 1 mio. • prepared for numbering and perforating • conventional dampening • VARN Compac III • BEIL – pin register with plate punch • quick action plate clamps • antistatic device at feeder • special feeder for envelopes • WEKO – powder spray • numeration and perforation
Format: 520 x 720 mm • 1 printing unit • Conventional dampening • Normal delivery
2 colours offset press of size 52 x 74 cm • impressions: 22 mio. • ROLAND MATIC – alcohol dampening • EDELMANN refrigeration, filtration and recirculation • BEIL – pin register system • vacuum belts on feeder table incl. vacuum front and side lay • quick action plate clamps • Cardboard guiding device • Super Blue • non-stop at feeder and in delivery • WEKO T6 powder spray
size 48 х 66 cm • 2 printing units • impressions – 62 mio. • stream feeder • electrical double-sheet control • semi alcohol dampening incl. refrigeration, filtration, recirculation • perfector 2+0 / 1+1 • blanket cylinder washing devices • + Version - geared to numbering and perforating • GRAFIX – powder sprayer • BACHER pin register system with plate punch
Counter: 67 mio. • Machine number: 5316хх Dampening VARN-Compakt IV (2003) • Quick action plate clamps BACHER register system • WEKO powder sprayer
2 colours • Size: 52 x 72 cm • Counter: only 52 Mio. • Quick action plate clamps • Conventional dampening • Perfector: 2+0/1+1 • WEKO Powder sprayer • High pile delivery
Series: 634, Ma.Nr: 15529 B • Format: 520 x 720 mm • 2 printing units • Conventional dampening • High pile delivery
size: 52 x 74 cm • impressions: 90 m • four printing units • normal delivery • RCI – 2 control console • Rolandmatic – alcohol dampening • EDELMANN – refrigeration, dosing and recirculation • cardboard guiding device • acoustic side lay • TANDEM – dampening rollers – 2 pcs. • axial transfer roller control • SUPER BLUE • sheet decurler • GRAFIX – IR dryer • WEKO T66C – powder spray • plate punch
CPC1 - 04 console • CP – Tronic • Alcolour • Preset • Autoplate • Blanket washing device • Bacher register incl. plate punch • Alphatronic • Grafix – powder spraye
Four-Colour Offset Press • Size: 53 x 74 cm; • Prinect Press Center™ with remote ink control • Automatic inking roller, blanket and impression cylinder wash-up device • Oscillation inking rollers • DryStar Ink infrared dryer • High-Pile Delivery • Post Drupa 2008 model
Counter: 51 mio • Format: 460 x 640 mm • 4 printing units • Conventional dampening • High pile delivery • IVT IR-dryer
Counter: 41 mio • Size: 48 - 65 cm • MABEG – feeder • Vacuum belts on feeder • RCI – 2 with Digital Register Control • Alcohol dampening Roland-matic • Alcohol metering, cooling and recirculation EDELMANN • Quick action plate clamps • Perfector 4+0 / 2+2 • WEKO T66C powder spray • Grapho-Metronic – Plate Register System • SUPER BLUE in delivery
8 colours • Size: 72 x 102 cm • Counter: ca. 192 mio. • CPC 1-04 - Classic Center • Feeder: Preset Stream Feeder • Ionization unit: ELTEX • Ink roller cooling TECHNOTRANS • Dampening and cooling TECHNOTRANS • AutoPlate • Air supply cabinet • Ink roller and blanket washng device with brushes • Drying system: HD IR Preset • Powder sprayer: EXATRONIC PLUS
Web width: 500-620 mm • Cut-off: 440 mm • 4 piece – "blanket to impression" single printing unit • Reel stand with web guide device • Perfector: 4+0 / 2+2 / 1+3 / 3+1 • Sheeter Capacity up to 18.000 sheets/h • Conventional dampening • Condition: completely overhauled, checked and refurbished
Web width: 700-915 mm • Cut-off: 560 mm • 1 piece Y–"blanket to blanket" printing unit, (2+1 colors) • Integrated real stand in the printing unit • Jaw folder with 2 folds • Third fold (quarter fold) • Belt delivery
Stacker
Formats: Broadsheet format 560 mm x B/2 • Tabloid format /web width - 840 mm/ 280 х 420 mm • Quarter fold /web width - 840 mm/ 280 х 210 mm • Capacity: up to 40 000 circulations/h
Double-stack rail stand with integrated INFEED • Two double printing units (blanket to blanket) • Folder with 2 folds • Belt delivery • Conventional dampening
size - 80 cm • hydraulic system • completely overhauled • modernized with a digital display, frequency controlled positioning motor and rotary encoder • positioning PLC for 100 programs • positioning accuracy: ± 0.05 mm • 2 knives, documentation
origin: Italy • size: 82 cm; • cutting accuracy: ± 0.1 mm • light barrier • "periscope" type measuring system with a magnifying glass
size – 76 cm • hydraulic system, air table • photo-electric safety guards • 2 side tables • 2 knives, documentation
size – 76 cm • hydraulic system, air table • digital display • electronic programming unit with 99 programs • 2 side tables • 2 knives, documentation
size – 92 cm • hydraulic system, air table • digital display • electronic programming unit with 99 programs • 2 side tables • 2 knives, documentation
size - 92 cm • new CNC control, type DNC 3.1 • positioning accuracy up to 0.05 mm • 100 programs, each having up to100 steps • colour touch screen 6.0” diagonally • new electrical equipment of main power board • hydraulic system, grinded air able • 2 side air tables • photo-electric safety guards with high level of protection • 2 knives – sharpened • documentation
size - 92 cm • new CNC control, type DNC 3.1 • positioning accuracy up to 0.01 mm • 100 programs, 100 steps each • colour touch screen 8.0” diagonally • new electrical equipment - Siemens, Schneider-electric • hydraulic system, grinded air able • 2 side air tables • US- photo-electric safety guards, highly protective • new DC drive motor, OIE and coupling
size - 115 cm • hydraulic system, grinded air able • US- photo-electric safety guards • 2 side air tables • lift on the right side • new CNC control, type DNC • positioning accuracy up to 0.03 mm • 100 programs, 100 steps each • colour touch screen 6.0” diagonally • 2 knives
size - 132 см • hydraulic system, air table, photo-electric safety guards • 2 side air tables • DNC-control with accuracy up to 0.01 mm • CNC programming device with 100 programs, 100 steps each • colour touch screen 8.0” • 2 knives – sharpened
size: 132 cm • hydraulic system, air table, photo-electric safety guards • 2 side air tables • CNC programming device with 100 programs, 100 steps each • lift on the front right side • unloading device RSL • 2 knives, dokumentation
max. size cutted 300 x 420 mm • min. size cutted - 70 x 80 mm • feeder, belt delivery • capacity: 30 cycles/ min • 3 sets of knifes
Max. size cutted 290 x 430 mm • Min. size cutted - 93 x 120 mm • Capacity: variable up ot 100 cycles/ min • 3 sets of knives
max. sheet size - 44 х 59 cm • min. sheet size - 16 х 16 cm • working length (from knife to knife) - 42 х 51 cm • capacity – up to 4 200 cycles/ hour depending on the material • material - from 20 to 500g/ sqm
size 37 х 52 cm • capacity 0 - 3750 cycles/h • one heating plate with one heating zone, one temperature sensor and temperature controller • double foil pull device for two foils at a time • computer controlled programming device for individual pull of each mechanism • frequency control of main motor • mechanical pantograph for foil tension control • completely new electrical equipment
size 38 x 52 cm • converted for die cutting • capacity: up to 4 000 cycles/h
size 54 х 72 cm • capacity 0 - 4000 cycles/h • two heating plates with four heating zones, four temperature sensors and temperature controller • three foil pull devices for three foils at a time • computer controlled programming device for individual pull of each mechanism • frequency control of main motor • mechanical pantograph for foil tension control • completely new electrical equipment
size – 54 х 72 cm • converted for die cutting • capacity: up to 4 000 cycles/h • 2 frames, аccessories
Format max. 740 x 1100 mm • Format min. 210 x 1480 mm • Flat pile feeder • First folding unit – 4 buckles • Second folding unit – knife • 2 buckles left and right after knife • Third folding unit - knife • Belt delivery • LCD touch-screen for controlling all functions of the machine • Two CCD cameras with extra LCD display • Automatic size setings
Format max. 558 x 850 mm • Format min. 128 x 148 mm • Flat pile feeder • First folding unit - 4 buckles • Second folding unit – knife • 2 buckles left and right after knife • Belt delivery • LCD touch-screen for controlling all functions of the machine • Automatic size setings
Automatic size seting and controlling all functions from the 10.4" LCD touch panel • Book block size min. 145 x 105 mm • Book block size max. 320 x 320 mm • Spine thickness 1 – 65 mm • Cover size min 135 x 225 mm • Cover size max 320 x 660 mm • Four manual book block insert clamps • Automatic cover feed with creasing • Milling and roughening station • Spine gluing with hot melt • Side gluing • Paper dust- and smoke extraction • Delivery belt • Pump, counter
controlling of all functions from the LCD touch panel • book block size min. 135 x 105 mm • book block size max. 320 x 320 mm • spine thickness 1 – 50 mm • cover size min 135 x 230 mm • cover size max 320 x 660 mm • one manual book block insert clamps • automatic cover feed with creasing • milling and roughening station • spine and side gluing • paper dust extraction • vertical delivery • pump, counter
Presstacker HORIZON PST-40
max. size – 470 х 640 mm • capacity – up to 120 m/ min • palet feeder • first folding unit with 4 buckles • second folding unit – knife • shingle delivery • counter, pump
max. size – 720 x 1020 mm • GREMSER - pаlette feeder • first folding unit – 4 buckles • second unit – 4 buckles • third unit – 2 buckles • belt delivery • control console, counter, pump • anti-noise hoods on each folding section
max. size – 520 x 720 mm • flat pile delivery • first folding unit – 4 buckles • second unit – 4 buckles • third unit – knife • belt delivery • anti-noise hoods • counter, pump
Sheet size max: 72 х 102 cm • Sheet size min: 21 х 30 cm • CREMSER round pile feeder • Folding section I – 6 buckle chutes • Folding section II– 4 buckle chutes • Folding section III – 2 buckle chutes • Belt stream delivery • Control console, counter, pump • Anti-noise hoods on each folding section
1 manual book block insert clamp • milling and roughening station • spine gluing • side roller gluing • automatic cover feed • paper dust extraction, incl. dust collector • smoke extractor, incl. outer turbine • pump, counter
sheet size min – 75 mm • sheet size max – 320 mm • spine thickness – from 1 to 40 mm • cover size min – 220 х 140 mm; • cover size max – 640 х 324 mm; • cover sheet material – 100-300 g/ sqm • maximal mech. speed – up to 1 100 cycled/ h • four manual book block insert clamps • milling and roughening station • spine gluing and side gluing • automatic cover feed • paper dust- and smoke extraction • pump, counter • delivery belt with vertical pile delivery
3 clamps • sheet size min – 100 х 100 mm • sheet size max – 310 х 350 mm • spine thickness – from 3 to 40 mm • manual cover feed • milling and roughening station • spine gluing • side roller gluing • chip extractor • smoke extractor, incl. outer turbine • capacity – up to 360 books/ hour
5 clamps • automatic cover feed • utomatic cover scoring • milling and roughening station • hotmelt spine and side gluing • chip extractor • smoke extractor • belt delivery • Condition: rebuild
24-station gathering chain • double sheet and missing sheet control • Criss Cross delivery on the right • sheet size min. – 110 х 150 mm • sheet size max – 280 х 410 mm • maximum book block thickness (pressed) – 60 mm • capacity – from 32 to 80 cycles/ min.
max trimmed size – 465 х 300 mm • min trimmed size – 148 х 100 mm • capacity – up to 10 000 cycles/ h • 5-station gathering chain • one cover folder feeder • one hand-feed station • wire-stitching unit with Hohner 52/8 heads with JUMBO-rolls-device • three-knife trimmer • twin-belt stacking delivery
max. size untrimmed – 320 х 480 mm • min. size untrimmed – 92 х 128 mm • max. size trimmed – 305 х 474 mm • min. size trimmed – 89 х 120 mm • max. booklet thickness – 12 mm (6 mm opened) • min. capacity –1 500 cycles/ h • max. capacity - 13 000 cycles/ h • cover feeder • 2 horizontal feeders • 5 vertical feeders • Opticontrol (feeders 4, 5, 6) • wire stitching unit with length and thickness control • 4 standard Hohner stitching heads • 2 Hohner stitching heads, type “little head” • three-knife trimmer with central cut attachment for trimming of twin-signature • RIMA RS10 compensating counter stacker
automatic HEADOP 38 feeder with electromechanical programming • thread stitcher POLYGRAPH BREHMER, type 381-4E • normal stitch, shifted stitch, cross stitch • canvas feeder • cold binding roller
max. cover size unfolded 400 х 530 mm • min. cover size unfolded 110 х 155 mm • capacity – up to 14 cycles/ min • power supply – 2 kW • dimension: length – 2850 mm, width – 2600 mm, height – 1200 mm • net weight – 2150 kg • corner rounding machine • max format: 280 x 410 mm • max width of book block – 60 mm • capacity – 32-80 cycles/min • Condition: The machine is completely overhauled
Max. size – 66 x 96 cm • automatic feeder and delivery • no stripping • 6 chases • 2 plates • completely rebuild in 2010
Ma.Nr.: CX-2253 • Type: CX-92 • Format: 650 x 920 mm
Format min. 35 x 35 mm • Format max. 230 x 320 mm • Capacity – up to 600 000 labels/h • Condition: as new (look the pictures) • Dimension (Length X Height X Width): 2200 X 1350 X 680 mm • Electrical supply: 7,5 kW, 380 V, 50 Hz • Net weight: 1200 kg
stitching of booklets and blocks • stitching wire thickness: 0.35-0.9 mm • maximal stitching thickness: 25 mm • staple crown length: 12 mm • stitching speed: 165-215 cycles/min.
stitching of booklets and blocks • stitching wire thickness: 0.7-0.8 mm for round wire and 0.75х0.43 to 0.75х0.55 for flat wire • maximal stitching thickness: 8 mm • staple crown length: 8 or 12 mm • stitching speed: 160-220 cycles/min. • box length to be put in: 500 mm
Belt width – 970 mm • Machine length – 3 560 mm • Height – 820 - 930 mm • Power consumption – 42.9 kW • UV-lamps – 3 pcs • Reflector type – anodize aluminum • Belt type – teflon belt • Conveyer speed – 1-10 m/min • Pneumatic automatic lifting of the body with the UV-lamps by conveyer stop