High quality European steel
The specially polished blade guarantees smooth and sharp doctoring
Available in all configurations
Application: Flexo Print & Gravure
Widths: 8.5 - 80.0 mm
Thicknesses: 0.150 / 0.200 / 0.250 / 0.300 / 0.400 / 0.500 mm
Lamella: available
Bevel: available
Mulitblade: available
Short-Tip: available
Flexolife: available
Supporting blade: available
One-Step: available
Stable-Flex: available
Our proven flexo printing product worldwide
Solvents and water-based inks are the product’s area of application
Surfaces are protected thanks to the soft coating
Reduces score lines on the ceramic roller
Corrosion protection
Application: Flexo Print
Widths: 10.0 - 80.0 mm
Thicknesses: 0.150 / 0.200 / 0.250 / 0.300 / 0.400 / 0.500 mm
Lamella: available
Bevel: available
Mulitblade: available
Flexolife available
One-Step: available
Corrosion resistant
Especially suitable for water based inks, lacquers and other substrates with high pH values
Increased service life compared to standard blades
Application: Application Flexo Print, Gravure, Offset Print
Widths: 10.0 - 80.0 mm
Thicknesses: 0.150 / 0.200 / 0.250 / 0.300 / 0.400 / 0.500 mm
Lamella: available
Bevel: available
Mulitblade: available
Flexolife available
Supporting blade available
New coating technology allows to significantly reduce ink adherence to the doctor blade
Due to reduced ink adherence, significantly less drag outs and streaks in the print
Reduces back doctoring in Flexo printing
Outstanding performance with (cold seal) lacquers and in combination with adherent fluids
MDC PEARLSTAR reduces defects in the entire print run and increases your performance
Corrosion protection
Application: Special Applications
Widths: 10 - 60.0 mm
Thicknesses: 0.150 / 0.200 / 0.250 mm
Lamella: available
Mulitblade: available
Flexolife available
High reliability due to the very hard base coating
Extremely high service life with solvent-based inks
Very gentle on anilox roller thanks to additional soft coating
Suitable for very abrasive inks and lacquers
Consistently high print quality and short running-in period
Corrosion protection
Application: Flexo Print
Widths: 10.0 - 70.0 mm
Thicknesses: 0.150 / 0.200 / 0.250 / 0.300 / 0.400 mm
Lamella: available
Mulitblade: available
Flexolife: available
The product for the corrugated cardboard industry
For very long runs in conjunction with water based inks
Very short running-in period thanks to soft coating
100% corrosion resistant
Application:Flexo Print
Widths: 10.0 - 70.0 mm
Thicknesses: 0.150 / 0.200 / 0.250 / 0.300 / 0.400 mm
Lamella available
Bevel available
Mulitblade available
Flexolife available
Our bestseller for decades
An all-rounder for every printing application
Very high service life in continuous printing
Reduces drag outs, streaks and hazing in gravure printing
Application: Flexo Print & Gravure
Widths: 8.5 - 80.0 mm
Thicknesses: 0.150 / 0.200 / 0.250 / 0.300 / 0.400 mm
Lamella: available
Bevel: available
Mulitblade: available
Flexolife available
One-Step: available
Extended blade life due to durable base coating
Extremely high service life for long runs and multiple jobs
Ideal for Expanded Gamut Printing
Cleanest possible wipe over the entire blade life means no changes in tonal values
Very gentle on anilox thanks to additional soft coating
Application: Flexo Print & Gravure
Widths: 10.0 - 60.0 mm
Thicknesses: 0.150 / 0.200 / 0.250 mm
Lamella: available
Mulitblade: available
Flexolife: available
